Tripod
The 2-Way Telescoping Tripod with 3D Safety Adapter has an effective operational height of 4m (13ft) above grade and 4.5m (14ft 9 in) below grade. Complicated assemblies using various tripods are no longer an issue as you can greatly reduce the amount of laser scanning equipment needed on a job while increasing your productivity.
This tripod comes with 4 extension tubes that allow for the impressive range of the product; the ability to add height or depth as needed makes transportation lighter and less cumbersome; the interlocking design of the tubes ensures stability regardless of height or depth.
3/8″ adapter included, for use with FARO Focus 3D or Trimble TX5 laser scanner.
Finally, the 3D Safety Adapter is included with this tripod. The Safety Adapter ensures the extremely secure attachment of a laser scanner, as well as assembling quickly and precisely. Use the 3D adapter to safely scan in awkward or dangerous positions; a small investment to protect expensive scanners!
Developed and Manufactured in Germany.
Designated use:
• Laser Scanner usable over several heights, without extra assembly, disassembly or modification
• Greatly increases possible scanner positions
• 3D Safety Adapter included for overhead scanning
Product characteristics – 2-way telescope tripod:
• Tripod: 5/8 inch connection; adapter for 3/8 inch connection is included in the delivery
• Indirect crank drive with enhanced gear unit
• The crank drive can be operated by means of a hand crank or a screwdriver.
• Anti-twist geared column
• Additional leg braces for more stability
• Solid and quick locking mechanism
• Spirit level
• Set of shoes for tripod can be used on various surfaces
• Minimum effective depth: approx. 4.50 m (177.2 in) below grade
• Maximum useful height: approx. 4.00 m (157.5 in)
• Transport length: approx. 1.28m (50.4 in)
• Weight: approx. 10 kg
• Flat support plate with ø 110 mm
• Single telescope
• Telescope lift: 818mm (31.2 in)
• During long-term usage, the scanner’s weight should not be higher than 20kg.
• 4 prolongation tubes (each 1m (39.4 in)) in a robust transport case included
• Suited for all scanners with 5/8″ and 3/8″ connection
Product characteristics – 3D safety adapter:
• One part of the 3D safety adapter is screwed on the original base plate of the scanner.
• The other part of the adapter is screwed on the tripod with a 5/8 inch connection.
• The part of the adapter and the scanner can easily be inserted in the correspondent part fixed at the tripod, then secured with a safety pin.
• Weight: 200 g
• Dimensions: 100mm x 105mm x 100mm (3.94 in x 4.13 in x 3.94 in)
• Compatible laser scanners
• FARO Focus3D Trimble TX5
• Z+F IMAGER 5006
• Leica HDS 6000
Return to Accessories
